Huawei E960 - Select the Mode of PPP Connection; Configure SSID for WLAN

11
you need to enter the APN manually. The two parameters are provided by the network
carrier.
Select the Mode of PPP Connection
PPP Connection: It is used to select the dial access mode.
y Auto: After a device is started, the system automatically creates a permanent connection,
no matter whether there is data transfer.
y On Demand: The connection exists when there is data transfer, and disappears when
there is no data transfer.
y Manual: Manually dial up to create a connection.
Configure SSID For WLAN
SSID: Input a name for your WLAN
SSID is used to identify a WLAN. A wireless terminal (such as a PC) can communicate
with the gateway only when they have the same SSID. To ensure the WLAN security, do
not use the default SSID. SSID is case sensitive and at most 32 characters.