EasyManua.ls Logo

Huawei E960 - PC Configuration Requirements

Huawei E960
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2
y Steady on in green: Signal strength in level four or five (strong)
Network mode y Double blinking in green: Searching the network
y Blinking in green: Normal 2G network
y Steady on and in green: GPRS/EDGE data service connected
y Fast blinking in green: Downloading the upgrade mode
y Blinking in blue: Normal WCDMA network
y Steady on in blue: WCDMA data service connected
y Steady on in cyan: HSDPA data service connected
Note: When the gateway is initializedit is steady on in green for
three seconds.
Button
ON/ OFF Press and hold it to power on or off the E960
Interfaces
y Power adapter/USB cable: When connected with the power adapter, the E960 functions
as a wireless gateway. When connected to the PC with a USB data cable, the E960
functions as a USB modem.
y Ethernet cable: Insert a Ethernet cable connected to the PC or other network
equipments.
y Phone cable: Insert a phone cable connected with a telephone to realize the voice
service.
PC Configuration Requirements
The recommended PC configurations for using the E960 are as follows:
y CPU: Pentium 500 MHz or above
y Memory: 128 MB RAM or above
y Hard disk: 100 MB available space
y Operating System: Windows 2000,
Windows XP, or Windows Vista
y LCD resolution: 800*600 pixel or above,
recommended 1024*768 pixel.
y Interface: standard USB interface
y Internet Browser: Internet Explorer 6.0 or
above, Firefox 1.5 or above, Netscape 8.0 or
above
.

Related product manuals