40
MAC Filter Setting
Click to display the WLAN MAC Filter Setting interface. You can control and
manage the clients accessing WLAN to enhance security level.
MAC Restrict Mode
There are three parameter values, as shown in the following table.
Value Description
Disabled The MAC address restriction function is disabled.
Allow The clients with addresses in the MAC Address columns are allowed to
connect with the gateway through the WLAN.
Deny The clients with addresses in the MAC Address columns are not allowed to
connect with the gateway through the WLAN.
MAC Addresses
Enter MAC address in the list. The gateway can perform access control on the clients
whose addresses are in this list. The list can contain a maximum of 16 MAC addresses.
To Next Page
Loading...
