Huawei FusionModule800 Maintenance Guide

FusionModule800 Smart Small Data Center
Maintenance Guide
A Preventive Maintenance Table
Issue 02 (2016-11-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
146
Maintenance area
Item
Operation
Expected Result
Troubleshootin
g
N/A
Check that the
thermal insulation
foam is intact.
Rewrap the
thermal insulation
foam.
Electric heater
N/A
The electric heaters
are secured.
Secure the electric
heaters and
temperature
switches.
N/A
Check that the
electric heater
surfaces are not
eroded.
Replace the
electric heater by
following
instructions in
5.3.1.6 Replacing
an Electric Heater.
Monitoring unit
N/A
Export air
conditioner logs,
alarms,
temperature,
humidity, the
operating status of
the compressor,
fan, electric heater,
wet film
humidifier, and
water pump, and
time from the
monitoring system.
View the historical
alarms generated in
this quarter and
select the most
common five ones.
(If no monitoring
system is available,
skip this item.)
Rectify the fault
or contact Huawei
technical support.
Electric control box
components
N/A
Check that all fuses
work properly.
Replace abnormal
fuses.
N/A
Check that the
cable connection is
secure and correct.
Secure loose
cables.
N/A
Check that the
electrical
components and
control
components of the
indoor unit are free
from dirt.
(Perform the
operation with the
power off.) Use a
brush or
compressed dry
air to remove dust
from electrical

Huawei FusionModule800 Specifications

General

Brand	Huawei
Model	FusionModule800
Category	Storage
Language	English