15 Select a boot option to be configured, press F5 or F6 to change the boot order.
NICs are booted in the displayed order.
– Press F5 to move a boot option down.
– Press F6 to move a boot option up.
Set the BIOS password.
16 Select Security and press Enter.
The Security screen is displayed, as shown in Figure 5-24.
Figure 5-24 Security
17 Select Set Supervisor Password and press Enter, and set the administrator password.
The current password of the system administrator is required before you change the
password. The system will be locked if an incorrect password is entered three
consecutive times. You can unlock the system by restarting it.
FusionServer G5500 Server
User Guide
5 Configuring the G5500
Issue 02 (2017-12-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
99
To Next Page
Loading...
