Figure 5-27 iBMC login page
l Logging In to the iBMC as a Local User
a. Select the UI language.
b. Enter the user name and password.
NOTE
The default user name of the iBMC is Administrator, and the default password is
Admin@9000.
c. Select This iBMC or Automatic matching from the Domain drop-down list.
d. Click Log In.
If the login is successful, the Information Summary page is displayed, showing
the user name in the upper right corner.
NOTE
n If the system displays a message indicating that the user name or password is incorrect
when you attempt to log in to the iBMC WebUI for the first time using the Internet
Explorer after an upgrade, press Ctrl+Shift+DEL, and click Delete in the displayed
dialog box to clear the browser cache. Then attempt to log in again.
n
If you cannot log in to the iBMC WebUI by using the Internet Explorer, in the menu
bar of the Internet Explorer, choose Tools > Internet Options > Advanced, click
Reset.
l Logging In to the iBMC as an LDAP User
Before login, ensure that the following settings meet the requirements:
NOTE
For details about how to create a domain controller, a user domain, and LDAP users, see domain
controller documents. The iBMC provides only the access function for LDAP users.
– A domain controller exists on the network, a user domain has been created on the
domain controller, and the Lightweight Directory Access Protocol (LDAP) users
who belong to the user domain have also been created.
FusionServer G5500 Server
User Guide
5 Configuring the G5500
Issue 02 (2017-12-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
105
To Next Page
Loading...
