Step 2 Set an IP address for the PC, and ensure that the IP address is on the same network segment as
the iBMC management network port.
Step 3 Connect the PC to the iBMC management network port using a network cable.
Step 4 Open Internet Explorer, enter https://IP address of the iBMC management network port in
the address box, and press Enter.
Step 5 In the displayed security caution page as shown in Figure 5-26, click Continue to this
website.
NOTE
l The page is displayed only when you log in to the iBMC by using Internet Explorer.
l If you do not want this page to be displayed, add the iBMC to the site to the Java security list or
set the Java security level to a smaller value. This reduces user security. Perform this operation
with caution.
Figure 5-26 Security caution
Step 6 Log in to the iBMC using either of the following methods.
FusionServer G5500 Server
User Guide
5 Configuring the G5500
Issue 02 (2017-12-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
104
To Next Page
Loading...
