l You have logged in to the iBMC WebUI.
Data
l Table 5-12 lists the default data of the iBMC.
Table 5-12 Default user name and password
User Name Default Password Description
Administrator Admin@9000 This user is the default user of the
iBMC, belongs to the administrator
group, and has full rights to access all
iBMC resources and perform all
operations.
l You have obtained the iBMC IP address of the G530 V2.
Workflow
Figure 5-28 iBMC configuration process
配置iBMC IP地址
Procedure
Change the default password of the iBMC.
1 On the iBMC WebUI, choose Configuration on the menu bar, and click the Local Users
tab in the right pane. The Local Users page is displayed, as shown in Figure 5-29.
FusionServer G5500 Server
User Guide
5 Configuring the G5500
Issue 02 (2017-12-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
107
To Next Page
Loading...
