Scenarios
Set the BIOS for the G530 V2 in remote control mode.
BIOS settings include:
l Server boot priority
l NIC Preboot Execution Environment (PXE) priority
l BIOS password
For other settings, see the HUAWEI Server Purely Platform BIOS Parameter Reference.
NOTE
l The password complexity check function is enabled by default.
l A simple password is easy to crack, which makes the system vulnerable. You are advised to use a
password that meets complexity requirements or to enable the password complexity check function.
l To ensure system security, change your initial password at your first login and change the password
periodically.
Prerequisites
Conditions
The G530 V2 is powered on.
Data
No data preparation is required for this operation.
Workflow
Figure 5-35 shows the process for configuring the BIOS.
Figure 5-35 Process for configuring the BIOS
FusionServer G5500 Server
User Guide
5 Configuring the G5500
Issue 02 (2017-12-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
113
To Next Page
Loading...
