Figure 5-38 System Boot Option
10 Set Boot Mode Changeover by clicking or , and click Save.
– "
" : The boot mode can be changed over. The boot mode set on the iBMC
will be applied.
– "
" : The boot mode cannot be changed over. The boot mode set on the
BIOS will be applied.
NOTE
Common users are not authorized to switch between boot modes.
11 On the iBMC WebUI, choose Configuration from the main menu, select Boot Device
from the navigation tree, set Boot Mode to Legacy BIOS or UEFI (Unified Extensible
Firmware Interface), and click Save.
– Legacy BIOS: The OS starts from the BIOS.
– UEFI (Unified Extensible Firmware Interface): The OS starts from the Unified
Extensible Firmware Interface (UEFI).
12 Access the BIOS. For details, see 1 to #g5500_user_000017/step_007.
13 Choose Boot > Boot Type, and press Enter.
The Boot screen is displayed, as shown in Figure 5-39 and Figure 5-40.
FusionServer G5500 Server
User Guide
5 Configuring the G5500
Issue 02 (2017-12-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
116
To Next Page
Loading...
