NOTE
– The default BIOS password is Admin@9000.
– Set the administrator password immediately after your first login. For details, see Setting the
BIOS Password. For security purposes, change the administrator password periodically.
– Enter the administrator password. The server is locked after three consecutive failures with
wrong passwords. You can restart the server to unlock it.
Figure 5-37 Entering the password
6 Enter the password and press Enter.
7 Set the parameters as prompted on the BIOS Setup Utility screen.
Set the server boot priority.
The configuration method is as follows:
NOTE
The boot mode can be set on the BIOS and iBMC. Which mode is applied depends on the setting of
Boot Mode Changeover on the iBMC WebUI.
8 Log in to the iBMC WebUI.
For details, see 5.5.1 Logging In to the iBMC WebUI.
9 Choose Configuration from the main menu, and select Boot Device from the navigation
tree, as shown in Figure 5-38.
FusionServer G5500 Server
User Guide
5 Configuring the G5500
Issue 02 (2017-12-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
115
To Next Page
Loading...
