Procedure
Step 1 Remove the G560. For details, see 3.3 Removing the G560.
Step 2 Remove the GP608.
1. Press the unlock buttons on the GP608. See (1) in Figure 3-5.
Figure 3-5 Removing the GP608
2. Open the ejector levers on the GP608 completely. See (2) in Figure 3-5.
3. Pull the GP608 outwards. See (3) in Figure 3-5.
4. Open the handles on both side of the GP608. See (1) in Figure 3-6.
NOTICE
A fully configured GP608 is too heavy for one person to carry. To ensure safety, the
GP608 is automatically locked when it is pulled out halfway. It is recommended that the
GP608 be removed by two persons.
FusionServer G5500 Server
User Guide
3 Basic Operations
Issue 02 (2017-12-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
38
To Next Page
Loading...
