Step 3 Push the cover in the arrow direction until the cover clicks into place. See (2) in Figure 3-15.
----End
Removing the Cover of a GP316
Step 1 (Optional) Remove the GP316 from the G5500 chassis. For details, see 3.6 Removing a
GP316.
Step 2 Place the GP316 on the ESD floor.
Step 3 Press the button on the cover and push the cover backwards until it cannot move. See (1) and
(2) in Figure 3-16.
Figure 3-16 Removing the cover of a GP316
Step 4 Lift the cover off the GP316 and set it aside. See (3) in Figure 3-16.
----End
Installing the Cover of a GP316
Step 1 Place the GP316 on the ESD floor.
Step 2 Align the bottom tabs of the cover with the U-shaped slots in the GP316 case, and place the
cover vertically on the GP316. See (1) in Figure 3-17.
FusionServer G5500 Server
User Guide
3 Basic Operations
Issue 02 (2017-12-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
47
To Next Page
Loading...
