Figure 4-2 Installing dowel pins
2. Place the guide rail horizontally in the planned position, stretch the guide rail, and align
the holes on the guide rail with the holes on the inner slide rail of the cabinet. See (1) in
Figure 4-3.
NOTE
Guide rails are divided into left and right guide rails (labeled L and R). A pair of guide rails should
be installed together and cannot be installed reversely.
3. Use a screwdriver to tighten two screws on the front and two screws on the rear of the
guide rail. See (2) in Figure 4-3.
FusionServer G5500 Server
User Guide
4 Setup
Issue 02 (2017-12-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
52
To Next Page
Loading...
