Figure 4-3
4. Install the other guide rail using the same method.
Step 3 Install the chassis.
1. Lift the chassis by holding its left and right sides and slowly move it to the front of the
cabinet. This task requires two or four persons.
2. Push the chassis along the guide rails into the cabinet. See (1) in Figure 4-4.
3. Use a Phillips screwdriver to tighten the captive screws on the mounting ears to secure
the chassis to the cabinet. See (2) in Figure 4-4.
FusionServer G5500 Server
User Guide
4 Setup
Issue 02 (2017-12-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
53
To Next Page
Loading...
