Huawei LUNA2000-2.0MWH Series - Opening the Doors of the ESS

NO TICE
When hoisting the ESS, ensure that the four corner ttings of the ESS are aligned
with the marked mounting positions for corner ttings on the concrete platforms.
Figure 4-2 Hoisting the ESS
Step 2 Cut open the protective cover using a utility knife and remove the protective cover.
WARNING
● When removing the protective cover, take protective measures for working at
heights.
● Do not remove the protective cover in bad weather conditions such as rain and
snow.
----End
4.2.3 Opening the Doors of the ESS
CA UTION
Do not open the container door in rainy, snowy, lightning, or dusty weather
conditions.
Procedure
Step 1 Use a cable cutter to cut
o the TSA approved lock on the door of the control unit
cabin.
LUNA2000-2.0MWH Series Smart String ESS
User Manual 4 Installation
Issue 08 (2022-11-15) Copyright © Huawei Technologies Co., Ltd. 97