Huawei LUNA2000-2.0MWH Series - Why Does the PSU Not Start After the Water and Fire Alarms Are Cleared; WebUI Menus

Step 3 Perform the next step as prompted.
----End
11.5 Why Does the PSU Not Start After the Water and
Fire Alarms Are Cleared
Step 1 Choose Monitoring > Running Param > Fire suppression > Starting up on the
SmartLogger WebUI.
Figure 11-3 Page of restoring the power supply
----End
LUNA2000-2.0MWH Series Smart String ESS
User Manual 11 FAQ
Issue 08 (2022-11-15) Copyright © Huawei Technologies Co., Ltd. 221