Huawei LUNA2000-2.0MWH Series - Embedded Power Subrack

Table 2-14 General specications
Technical Specications Smart Rack Controller
Parallel mode Two parallel Smart Rack Controllers on
the battery side and two on the bus
side
Overvoltage category Bus side DC II
Dimensions (H x W x D) 270 mm x 600 mm x 820 mm
Net weight ≤ 90 kg
IP rating IP66
DC surge protection on the bus side Type II
Operating temperature range –30°C to +60°C
Operating humidity range 0–100% (non-condensing)
Storage temperature –40°C to +70°C
Storage humidity 5%–95% RH
Cooling mode Intelligent air cooling
Maximum Operating Altitude 4000 m
Communications port CAN, RS485, FE
2.6.1.3 Embedded Power Subrack
ETP48400-C3B1
Embedded Power Subrack (ETP48400-C3B1) is an embedded power system that
converts AC power into DC power. It supplies DC constant voltage to the
equipment.
Figure 2-20 Appearance
(1) Ground screws
(2) AC input module (3) LLVD power distribution
LUNA2000-2.0MWH Series Smart String ESS
User Manual 2 Overview
Issue 08 (2022-11-15) Copyright © Huawei Technologies Co., Ltd. 42