Huawei LUNA2000-2.0MWH Series - CO Sensor

2.6.4.1 CO Sensor
CO sensor detects the concentration of CO in combustible gases.
Figure 2-35 Appearance
Table 2-23 Technical specications of the CO sensor
Technical Specications CO Sensor
Dimensions (H x W x D) 40 mm x 97 mm x 25 mm
Operating voltage 8–30 V DC
Stability ≤ ±3% FS/year
Precision ≤ ±10% FS
Power consumption 0.12 W
Output signal RS485
Operating temperature –25°C to +55°C
Humidity 5%–95% RH (non-condensing)
Resolution ≤ 30 ppm
Response time ≤ 60s
Cabling mode RJ45 network port
Installation mode Gourd-shaped mounting hole/nut/magnet
Figure 2-36 Pins of an RJ45 connector
LUNA2000-2.0MWH Series Smart String ESS
User Manual 2 Overview
Issue 08 (2022-11-15) Copyright © Huawei Technologies Co., Ltd. 60