Huawei LUNA2000-2.0MWH Series - Page 113

Figure 4-8 Securing the ESS
----End
Follow-up Procedure
After the ESS is installed, verify the installation to ensure normal use of products
and smooth subsequent installation.
Table 4-3 Verifying the installation
No.
Check Item Check Method Criteria
1 Bolts and nuts Tighten the bolts
and nuts again
using a wrench
with the same
torque.
Bolts and nuts are
tightened.
2 Check whether the doors of
the ESS can be opened and
closed properly.
Open and close
the doors of the
ESS.
All doors of the
ESS can be
opened and
closed properly.
LUNA2000-2.0MWH Series Smart String ESS
User Manual 4 Installation
Issue 08 (2022-11-15) Copyright © Huawei Technologies Co., Ltd. 103