During parameter setting, click Previous, Next, or Skip as required.
1. Complete settings on the Basic parameters page.
Figure 8-3 Setting basic parameters
After setting basic parameters, you can choose one of the communication
methods according to the actual situation.
Figure 8-4 Using the wireless network (4G/3G/2G) for communication
Figure 8-5 Using the ETH interface for communication
2. After Huawei devices are connected, click Search for Device to check cable
connections, identify the topology, and rectify alarms.
LUNA2000-2.0MWH Series Smart String ESS
User Manual 8 SmartLogger Web-based Deployment
Issue 08 (2022-11-15) Copyright © Huawei Technologies Co., Ltd. 161
To Next Page
Loading...
