Huawei LUNA2000-2.0MWH Series - Powering Off the Smart PCS

Figure 8-7 Parameter settings after device search
Parameter Description
Running under Grid
connection state
You need to set this parameter only for the PCS,
but not the SUN2000.
– In the on-grid scenario, set this parameter to
On-grid(PQ).
– In the o-grid scenario, set this parameter to
O-grid(VSG).
Microgrid compatibility – In the on-grid scenario, set this parameter to
Disable.
– In the o-grid scenario, set this parameter to
Enable.
Grid Code Set this parameter based on the grid code of the
country or region where the devices are used.
4. Connect to the power meter.
LUNA2000-2.0MWH Series Smart String ESS
User Manual 8 SmartLogger Web-based Deployment
Issue 08 (2022-11-15) Copyright © Huawei Technologies Co., Ltd. 163