Parameter Description
Automatic SOC
calibration
▪ The default value is Disable.
▪ If an ESS is required to automatically
calibrate the SOC precision, set this
parameter to Enable. During automatic
SOC calibration, the SOC of each ESR is
charged to 99% or higher in turn.
Automatic SOH
calibration
▪ The default value is Disable.
▪ If this parameter is set to Enable, the ESS
calibrates the SOH precision and fully
charges and discharges each ESR in turn.
7. Connect to Huawei NMS.
Figure 8-12 Huawei NMS
8. Connect to a third-party NMS.
Figure 8-13 Third-party NMS
9. Connect to third-party devices.
LUNA2000-2.0MWH Series Smart String ESS
User Manual 8 SmartLogger Web-based Deployment
Issue 08 (2022-11-15) Copyright © Huawei Technologies Co., Ltd. 167
To Next Page
Loading...
