● Optical power meter
● Network cable tester
● Multimeter
Networking Information
The maintenance personnel must know:
● Common networks of storage systems
● Networks at maintenance sites
● Device running status at maintenance sites
Device Information
The maintenance personnel must collect and save:
● Alarms of devices
● Logs of devices
● Preventive maintenance information
3.2 Tools and Instruments
This section describes tools and instruments required for parts replacement.
Table 3-1 lists the tools and instruments required for parts replacement.
Table 3-1 Tools and instruments required for parts replacement
Tool and Instrument
Used To
Optical power meter Measure optical power.
Optical ber jumper Replace faulty ber jumpers.
Fiber binding straps Bind faulty ber jumpers.
Network cable Replace faulty network cables.
Network cable tester Test the connection of network cables.
Multimeter Test electrical parameters.
ESD wrist strap Protect ESSDs from the static
electricity of users.
ESD bag Protect ESSDs from static electricity.
ESD gloves Protect ESSDs from the static
electricity of users.
ESD clothes Protect ESSDs from the static
electricity of users.
Phillips screwdriver Loosen or tighten screws on devices.
OceanStor V5 Series
Parts Replacement 3 Preparations Before Parts Replacement
Issue 15 (2019-12-30) Copyright © Huawei Technologies Co., Ltd. 10