Huawei OceanStor V5 Series User Manual

7 Replacing FRUs
This chapter describes how to replace FRUs.
You can refer to the parts replacement multimedia for a dynamic view of the replacement
procedure. For details, see 5 How to Access Parts Replacement Multimedia.
7.1 Installing and Using SmartKit
7.2 Replacing the Parts of a Disk Enclosure
7.3 Replacing a Controller Enclosure
7.4 Replacing a Controller
7.5 Replacing an Assistant Cooling Unit (for 6800 V5/6800F V5)
7.6 Replacing a Cable
7.7 Replacing an Interface Module
7.8 Replacing an 8 Gbit/s Fibre Channel Interface Module (Eight Ports)/16 Gbit/s
Fibre Channel Interface Module (Eight Ports)
7.9 Replacing a Management Module
7.10 Replacing a Data Switch
7.11 Replacing the Parts of a Quorum Server
7.1 Installing and Using SmartKit
SmartKit (formerly named Toolkit) is a serviceability tool developed by Huawei. It
helps technical service engineers and maintenance engineers manage and
maintain devices.
7.1.1 Installing SmartKit
This operation enables you to install SmartKit and desired tool packages on your
maintenance terminal.
OceanStor V5 Series
Parts Replacement 7 Replacing FRUs
Issue 15 (2019-12-30) Copyright © Huawei Technologies Co., Ltd. 135

Huawei OceanStor V5 Series Specifications

General

Drive Types	SSD, SAS, NL-SAS
Data Reduction	Deduplication, Compression
Series	OceanStor V5
Category	Storage
Supported Protocols	FC, iSCSI, NFS, CIFS, HTTP
RAID Levels	0, 1, 3, 5, 6, 10, 50
Data Protection	remote replication
Operating System Compatibility	Windows, Linux, VMware, AIX, HP-UX
High Availability	Redundant components, controller failover
Power Supply	Redundant power supplies
Cooling	Redundant fans