7.1.3 Replacing an FRU
This section describes how to use the FRU replacement tool to replace parts.
Prerequisites
The parts replacement package has been installed.
Context
FRUs are components that engineers can replace at the deployment site by
performing the operations in the operation guide.
This section uses an optical module as an example.
Install the latest SmartKit before replacing an FRU.
Operators: technical support engineers and maintenance engineers from Huawei
or
certied by Huawei
Procedure
Step 1 Log in to SmartKit.
Step 2 Optional: Download the FRU Replacement tool package. If the FRU Replacement
tool package has been downloaded, go to Step 3.
● If you can access the Internet on your maintenance terminal, choose Home >
Storage > Parts Replacement > Parts Replacement. In the dialog box that is
displayed, click OK to download and install the FRU Replacement tool.
● If you cannot access the Internet on your maintenance terminal, click
Function Management on the home page. On the page that is displayed,
click Import to import a package that has been exported from another
SmartKit environment and install it in
oine mode.
For details about oine installation operations, see Function Import and Function
Export in the
SmartKit User Guide
.
Step 3 Choose Home > Storage > Parts Replacement > Parts Replacement. The Parts
Replacement page is displayed.
OceanStor V5 Series
Parts Replacement 7 Replacing FRUs
Issue 15 (2019-12-30) Copyright © Huawei Technologies Co., Ltd. 142