Figure 7-85 Removing an 8 Gbit/s Fibre Channel interface module (eight ports) (6
U controller enclosure as an example)
Step 7 Place the removed 8 Gbit/s Fibre Channel interface module (eight ports) into an
ESD bag.
Step 8 Take the spare part out of its ESD bag.
Step 9 Insert the spare part into the empty slot until it clicks into place, as shown in
Figure 7-86.
OceanStor V5 Series
Parts Replacement 7 Replacing FRUs
Issue 15 (2019-12-30) Copyright © Huawei Technologies Co., Ltd. 233
To Next Page
Loading...
