Huawei OceanStor V5 Series - Page 27

Conguration Item Requirement Description
CPU Dual-core 2.4 GHz or
higher
If SmartKit is installed
on a VM, the CPU of
the VM must be at
least 2.4 GHz.
Memory 400 MB or more free
memory
If SmartKit is installed
on a VM, the memory
of the VM must be at
least 400 MB.
Disk space Larger than 2 GB for
the remaining space of
the disk on which the
OceanStor SmartKit
resides
-
Screen resolution 1024 x 768 or above -
Supported browsers Internet Explorer: IE 7,
IE 8, IE 9, and IE 10
Used when you view
maintenance reports.
Max. number of
managed devices
256 -
Installation
requirement
Only support for letters,
digits, underscores, and
single blank spaces in
the installation path
SmartKit needs to use
7z (compression
software). The
compression software
only supports
directories containing
letters, digits,
underscores, and
spaces. Therefore, the
installation path of
SmartKit must contain
only letters, digits,
underscores, and single
blank spaces.
● Requirements for networks
The maintenance terminal where SmartKit is installed must be correctly
connected to the management network ports of storage systems.
Procedure
Step 1 Download SmartKit.
If the maintenance terminal cannot access the Internet, you need to use another terminal
that can access the Internet to download the SmartKit installation package. Then copy
the package to the maintenance terminal.
OceanStor V5 Series
Parts Replacement 6 Replacing CRUs
Issue 15 (2019-12-30) Copyright © Huawei Technologies Co., Ltd. 18