EasyManuals Logo

Huawei UPS2000-G Series User Manual

Huawei UPS2000-G Series
175 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #119 background imageLoading...
Page #119 background image
Provides an access security mechanism, assigns rights to users based on roles,
and implements IP address control over HTTPS, SNMPv3, and SNMP access to
prevent unauthorized access.
Provides comprehensive UPS management, such as producing a current
diagram, displaying alarms, controlling UPS running, collecting performance
data statistics, as well as allowing users to view, retrieve, and export historical
alarms and operation logs.
Supports optional components such as temperature and humidity module.
Works with NetShutdown, a computer and server security shutdown program
developed by the Company, to automatically and safely shut down the
computers and servers where NetShutdown is installed to protect customer
data and reduce loss.
Works with RCCMD, a client shutdown software developed by Generex, to
automatically and safely shut down the clients where the RCCMD is installed
to protect customer data and reduce loss.
Sends alarm information to a
specied email address (for example, 163 email
address) at scheduled time.
6.3 Modbus Card
The RMS-MODBUS01A provides an RS485 networking solution to remotely
manage the UPS.
The card implements the following functions by setting the DIP switches:
Provides a DIP switch for selecting the RS485 communications protocol. The
Modbus and YDN-23 protocols are supported.
Uses a DIP switch to select a two-wire or four-wire system.
Provides a DIP switch to select a build-out resistor.
Provides a DIP switch for setting the optional card address.
Supports hot swap.
6.4 Dry Contact Card
The RMS-RELAY01A is installed in an optional card slot and supports hot swap.
The dry contact card provides six alarm dry contact outputs (normal mode, battery
mode, bypass mode, low battery voltage, bypass backfeed, and UPS faults) and
two dry contract control inputs (one is the shutdown signal input, and the other is
reserved).
UPS2000-G-(6 kVA-20 kVA)
User Manual 6 Communications
Issue 21 (2022-10-13) Copyright © Huawei Technologies Co., Ltd. 111

Table of Contents

Other manuals for Huawei UPS2000-G Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei UPS2000-G Series and is the answer not in the manual?

Huawei UPS2000-G Series Specifications

General IconGeneral
Frequency50/60 Hz
Output Power Factor0.9
Humidity0% to 95% (non-condensing)
DimensionsVaries by model
WeightVaries by model
Capacity1 kVA, 2 kVA, 3 kVA
Input Voltage220 Vac (120 Vac/208 Vac/230 Vac/240 Vac)
Output Voltage220/230/240 VAC
EfficiencyUp to 95%
TopologyDouble conversion online
Battery TypeSealed Lead Acid
Communication PortsUSB, RS232
Optional CommunicationSNMP
Operating Temperature0°C to 40°C

Related product manuals