Huawei UPS2000-G Series User Manual

9.7 ECO Specications
Table 9-13 ECO specications
Item 6 kVA 10 kVA 15 kVA 20 kVA
ECO voltage
tolerance
Default value: ±10% (congurable on the LCD)
The range is ±5% to 10%
ECO frequency
tolerance
Default value: ±2 Hz (congurable on the LCD)
The range is ±0.5 Hz to ±3 Hz
9.8 Parallel System Specications
Table 9-14 Parallel system specications
Item 6 kVA 10 kVA 15 kVA 20 kVA
Number of UPSs
in parallel (two
live wires)
1+1
Number of UPSs
in parallel (other
mode except two
live wires)
≤ 4
NO TE
The UPS2000-G-15 kVA/20 kVA (single-phase input single-phase output) supports 3+1
parallel systems at most, instead of 4+0 parallel systems.
9.9 Safety Regulations and EMC
Table 9-15 Safety regulations and EMC
Item
Standards Compliance Remarks
Electromag
netic
compatibili
ty
Conducted radiation: IEC/EN
62040-2
-
Voltage change, uctuations,
and icker I ≤ 16 A, IEC/EN
61000-3-3; 16 A < I ≤ 75 A,
IEC/EN 61000-3-11
-
UPS2000-G-(6 kVA-20 kVA)
User Manual 9 Technical Specications
Issue 21 (2022-10-13) Copyright © Huawei Technologies Co., Ltd. 134

Huawei UPS2000-G Series Specifications

General

Frequency	50/60 Hz
Output Power Factor	0.9
Humidity	0% to 95% (non-condensing)
Dimensions	Varies by model
Weight	Varies by model
Capacity	1 kVA, 2 kVA, 3 kVA
Input Voltage	220 Vac (120 Vac/208 Vac/230 Vac/240 Vac)
Output Voltage	220/230/240 VAC
Efficiency	Up to 95%
Topology	Double conversion online
Battery Type	Sealed Lead Acid
Communication Ports	USB, RS232
Optional Communication	SNMP
Operating Temperature	0°C to 40°C