Huawei UPS2000-G Series User Manual

E Cleaning or Replacing the Air Filter (6
kVA and 10 kVA)
Prerequisites
If the model is UPS2000-G-6KRTS, UPS2000-G-6KRTL, UPS2000-G-10KRTS, or
UPS2000-G-10KRTL, perform the following steps to clean or replace the air lter.
Procedure
Step 1 Remove the front panel.
Step 2 Remove the air lter.
Figure E-1 Removing the air lter
(1) Air
lter
Step 3 Clean the air lter or prepare a new air lter.
Step 4 Install the cleaned or new air lter to the front panel.
UPS2000-G-(6 kVA-20 kVA)
User Manual
E Cleaning or Replacing the Air Filter (6 kVA and 10
kVA)
Issue 21 (2022-10-13) Copyright © Huawei Technologies Co., Ltd. 154

Huawei UPS2000-G Series Specifications

General

Frequency	50/60 Hz
Output Power Factor	0.9
Humidity	0% to 95% (non-condensing)
Dimensions	Varies by model
Weight	Varies by model
Capacity	1 kVA, 2 kVA, 3 kVA
Input Voltage	220 Vac (120 Vac/208 Vac/230 Vac/240 Vac)
Output Voltage	220/230/240 VAC
Efficiency	Up to 95%
Topology	Double conversion online
Battery Type	Sealed Lead Acid
Communication Ports	USB, RS232
Optional Communication	SNMP
Operating Temperature	0°C to 40°C