Huawei UPS2000-G Series User Manual

4.5 LCD Startup Screen
Table 4-3 Symbol conventions
Symbol Description
Press A.
Press B after you press A.
Indicates omitted screens.
NO TE
The symbol conventions apply to all chapters in this document.
NO TICE
● The LCD screenshots in this document correspond to the following software
versions:
The UPS2000-G-15KRTL/UPS2000-G-20KRTL software version is
V100R001C10SPC802.
The UPS2000-G-15KRTL-01/UPS2000-G-20KRTL-01 software version is
V100R001C34SPC600.
The screenshots may be updated without notice. Contact technical support to
obtain the latest screenshots if necessary.
● The menus of the UPS2000-G-15KRTL/UPS2000-G-20KRTL/UPS2000-
G-15KRTL-01/UPS2000-G-20KRTL-01 are used as an example. The information
in the menu screenshots is for reference only. For details about the parameters,
see the actual LCD display of the UPS.
Figure 4-2 describes the LCD startup screen.
Figure 4-2 Description of the startup screen
UPS2000-G-(6 kVA-20 kVA)
User Manual 4 Control Panel
Issue 21 (2022-10-13) Copyright © Huawei Technologies Co., Ltd. 54

Huawei UPS2000-G Series Specifications

General

Frequency	50/60 Hz
Output Power Factor	0.9
Humidity	0% to 95% (non-condensing)
Dimensions	Varies by model
Weight	Varies by model
Capacity	1 kVA, 2 kVA, 3 kVA
Input Voltage	220 Vac (120 Vac/208 Vac/230 Vac/240 Vac)
Output Voltage	220/230/240 VAC
Efficiency	Up to 95%
Topology	Double conversion online
Battery Type	Sealed Lead Acid
Communication Ports	USB, RS232
Optional Communication	SNMP
Operating Temperature	0°C to 40°C