Huawei UPS2000-G Series - Restoring Factory Settings; Control

Table 4-36 Shallow Discharge screen (UPS2000-G-6KRTS/UPS2000-
G-10KRTS/UPS2000-G-15KRTL/UPS2000-G-20KRTL)
Item Description Default Value Value Range
Test
noticati
on
Determine whether to
periodically send shallow
discharge test notications.
The values include Disabled
and Enabled. The default
value is Disabled. If the
value is Enabled, the
system sends shallow
discharge test
notications.
The parameter is
congurable in any mode.
Disabled Disabled,
Enabled
Time
interval
Set the time interval for
shallow discharge tests. The
parameter is congurable in
any mode.
60 days 30–90 days
Discharge
ratio
Set the proportion of the
discharge capacity to the
total discharge capacity. The
parameter is congurable in
any mode.
20% 10%–50%
4.6.3.5 Restoring Factory Settings
You can restore factory settings after the inverter shuts down.
4.6.4 Control
On the Main Menu screen, select Control, and press
. The Control screen is
displayed.
Startup
The Startup menu allows you to start the inverter.
Figure 4-44 Startup screen
Shutdown
The Shutdown menu allows you to shut down the inverter.
UPS2000-G-(6 kVA-20 kVA)
User Manual 4 Control Panel
Issue 21 (2022-10-13) Copyright © Huawei Technologies Co., Ltd. 91