Figure 4-45 Shutdown screen
Replace Batteries
If the batteries have been replaced for the system, set this parameter. The
parameter is congurable in non-battery inverter mode or non-battery ECO mode.
Figure 4-46 Replace Batteries screen
Maintain Batteries
● Shallow Discharge Test
Figure 4-47 Shallow Discharge Test screen
● Capacity Test
After you completely discharge batteries, the load rate must be in the range
of 0%–100%.
● Stop Test
Figure 4-48 Stop Test screen
This item allows you to stop the shallow discharge test or capacity test.
● Manual EC for Pos.
Figure 4-49 Manual EC for Pos. screen
UPS2000-G-(6 kVA-20 kVA)
User Manual 4 Control Panel
Issue 21 (2022-10-13) Copyright © Huawei Technologies Co., Ltd. 92
To Next Page
Loading...
