Huawei UPS2000-G Series User Manual

Figure F-2 Maintain Batteries screen
Figure F-3 Active Alarms screen
Step 2 Cancel the battery maintenance notication function.
NO TE
If you do not want the battery maintenance notication 0036-01 to appear again, perform
the following steps:
1. On the Main Menu screen, select Settings and press . The Settings login
screen is displayed. The preset password is 000001. After you enter the correct
password and press
, the Settings screen is displayed.
2. UPS2000-G-15KRTL-01/UPS2000-G-20KRTL-01: Choose Battery Parameters
and Shallow Discharge, and then change the value of Scheduled test from
Enable to Disable
(congurable when the UPS works in any mode).
Figure F-4 Shallow Discharge screen (UPS2000-G-15KRTL-01/UPS2000-
G-20KRTL-01)
UPS2000-G-6KRTS/UPS2000-G-10KRTS/UPS2000-G-15KRTL/UPS2000-
G-20KRTL: Choose Battery Parameters and Shallow Discharge, and then
change the value of Test
notication from Enabled to Disabled
(congurable when the UPS works in any mode).
Figure F-5 Shallow Discharge screen (UPS2000-G-6KRTS/UPS2000-
G-10KRTS/UPS2000-G-15KRTL/UPS2000-G-20KRTL)
----End
UPS2000-G-(6 kVA-20 kVA)
User Manual
F Alarm Handing of Battery Maintenance
Notication
Issue 21 (2022-10-13) Copyright © Huawei Technologies Co., Ltd. 157

Huawei UPS2000-G Series Specifications

General

Frequency	50/60 Hz
Output Power Factor	0.9
Humidity	0% to 95% (non-condensing)
Dimensions	Varies by model
Weight	Varies by model
Capacity	1 kVA, 2 kVA, 3 kVA
Input Voltage	220 Vac (120 Vac/208 Vac/230 Vac/240 Vac)
Output Voltage	220/230/240 VAC
Efficiency	Up to 95%
Topology	Double conversion online
Battery Type	Sealed Lead Acid
Communication Ports	USB, RS232
Optional Communication	SNMP
Operating Temperature	0°C to 40°C