Pub. 42004-550A
Elemec3 Console Manual—Version 3.0 Page 76 of 114
P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-550A.docx
09/20
REMOVE SOUND—removes the highlighted audio file from the MESSAGE FRAGMENT list.
NOTE: It is not possible to delete message fragments in use in the configuration.
System Events
The Elemec3 system uses system events to control system behavior. The SYSTEM EVENTS
CONFIGURATION screen lists the EVENTS AND EVENT GROUPS by order of priority, with the event at the
top of the list having the highest priority. Change the priority of an event/event group by highlighting the
item and using the SET PRIORITY: up and down arrows to change the position in the list. Event priority is
critical to the desired operation of an Elemec3 system.
Figure 79. System Events Configuration
Messages created with the AUTOMATICALLY CREATE EVENT option are in the EVENTS AND EVENT
GROUPS pane.
Add Event
Click ADD EVENT… to oepn the CREATE NEW EVENT OBJECT
screen.
Enter a description for the event object below:—Enter a
unique description for the event.
Event/Event Group—Select either EVENT or EVENT GROUP.
Configuration of events is described next (see the Event Groups
section to configure event groups).
To Next Page
Loading...
