Humminbird SOLIX series User Manual

146
Mosaic
Turn on/off Contour Mode
Contour Mode controls how the water column is displayed in the Mosaic. The location of a target in the Mosaic is influenced by the
Contour Mode setting. For more information, see Customize the Side Imaging View: Turn on/off Contour Mode.
When Contour Mode turned off, the water column is displayed on the view. The location of a target on the display is based on the
slant range to the target.
When Contour Mode is turned on, the bottom is graphed at a constant point on the display, regardless of changes in depth. The Side
Imaging beams are divided by a vertical line. The water column is removed from the view, which allows the display to show targets
at their linear horizontal distance. The location of a target may be easier to interpret when the water column is removed.
Turn on/off Contour Mode
1. From the Mosaic Live menu, select Contour Mode.
2. Tap the on/off button, or press the ENTER key, to turn it on/off.
Off: The water column is displayed.
On: The water column is hidden.

Humminbird SOLIX series Specifications

General

Depth-Sonar Standard	Up to 1, 500 feet (varies by model)
Interface	Touchscreen
GPS	Yes
Cartography	Humminbird Basemap
Target Separation	2.5 inches
Networking	Ethernet, NMEA 2000
Memory Card Slot	Yes
Waterproof	IPX7
Operating Frequency	1.2MHz
Dimensions	Varies by model
Weight	Varies by model
Display Size	10.1", 12.1"
Display Resolution	1280 x 800 pixels (varies by model)
Operating Temperature	-15°C to 55°C (5°F to 131°F)