Spindle Type
Sets the spindle to the correctly installed spindle type. Select either the standard
threaded spindle or the optional Auto-Clamp pneumatic spindle.
Load Roller Type
Enables the load roller, or disables if no load roller is present.
HammerHead™
Setup options for the HammerHead option.
Road Force Audit Mode
Enables Road Force Audit. While in service mode, select Quickmatch. Select the last
option which is “Enabled, with Road Force”. Save setup and return to balance
screen.
118
Equipment Information GSP9720JLR Wheel Balancer Operation Instructions
To Next Page
Loading...
