Specific Precautions/HammerHead™ TDC Laser Indicator (Optional)
The TDC (Top Dead Center) Laser Indicator is a class 2M laser designed to aid in
applying clip-on weights. The laser is not a field serviceable or adjustable part.
Use caution in regard to reflective materials around the laser and never look into the
laser beam.
Turning Power ON/OFF
The ON/OFF switch is located on the back of the balancer cabinet. To turn the
balancer “ON,” press the “I” side of the ON/OFF switch. To turn the balancer “OFF,”
press the “O” side of the ON/OFF switch.
The system requires about twenty two seconds to “boot up.”
After the GSP9720JLR performs a self-check, the “Logo” screen will appear
indicating the unit is ready for use.
6
Getting Started GSP9720JLR Wheel Balancer Operation Instructions
To Next Page
Loading...
