Move the inner Dataset® arm to a position centered behind a spoke, in the DOWNWARD
arm position to align the spoke location. Enter the data by pressing the foot pedal.
Placing Hidden Weight Inside of Hollow Spokes
On some wheels, it may be possible to hide all of the right weight plane adhesive
weights inside of a hollow spoke. However, wheel design may make it impossible to
enter the right weight plane with the inner Dataset® arm.
The following example is in the mixed weight mode. Move the inner Dataset® arm to
left plane position. Enter the data by pressing the foot pedal.
Measure the distance from the left weight plane to the desired right weight plane,
using a tape measure. This distance must be in millimeters (convert inches to
millimeters by multiplying by 25.4).
70
Balancing Procedures GSP9720JLR Wheel Balancer Operation Instructions
To Next Page
Loading...
