Hunter GSP9700 Series - Smartweight Balancing Technology; Dynamic Balancing - Traditional Balancing Mode

SmartWeight® Balancing Technology
SmartWeight® Balancing Technology is a method of reducing forces on a wheel
during balancing. SmartWeight is not a procedure. Instead, it measures the forces of
side-to-side movement and up-and-down shake and computes weight to reduce
these forces. This reduces the amount of weight, reduces time, reduces check spins
and chasing weights. SmartWeight saves the shop time and money. Refer to
“SmartWeight Balancing Technology,” page 15.
Dynamic Balancing – Traditional Balancing Mode
NOTE: Enter wheel dimensions before selecting dynamic balancing.
If SmartWeight mode is enabled in setup, the balancer will
return to SmartWeight balancing upon dimension entry.
Dynamic balancing is selected by pointing the indicator to while rotating the
control knob. Dynamic will always display two weight planes. Dynamic balancing
provides a more complete balance than static balancing. Dynamic balancing should
be selected whenever possible to minimize vehicle vibration. Refer to “Balancing
Theory-Couple Imbalance,” page 14.
GSP9720JLR Wheel Balancer Operation Instructions Balancing Procedures
x
47