Equipment Installation and Service
A factory-authorized representative should perform installation.
This equipment contains no user serviceable parts. All repairs must be referred to a
qualified Hunter Service Representative.
NOTE: To replace program cartridge, refer to “Program Cartridge
and Security Key Removal and Installation,” page 111.
Equipment Specifications
Electrical
Voltage:
230VAC +10% / -15%, 1 phase, 50/60 Hz, power cable
includes NEMA 20 amp plug, L6-20P
Amperage: 10 amperes
Wattage: 3450 watts (peak)
Air
Air Pressure Requirements: 100-175 PSI (6.9-12.0 bar)
Approximate Air Consumption: 4 CFM (110 Liters/Minute)
Atmospherics
Temperature:
+32qF to +122qF (0qC to +50qC)
Relative Humidity: Up to 95% Non-condensing
Altitude: Up to 6000 ft. (1829 m)
Sound Pressure Level
Equivalent continuous A-weighted sound pressure at operator’s position
does not exceed 70 dB (A).
GSP9720JLR Wheel Balancer Operation Instructions Getting Started
7
To Next Page
Loading...
