Specific Precautions/Power Source
The GSP9720JLR is intended to operate from a power source that will apply 230VAC
+10% / -15%, 1 phase, 10 amp 50/60 Hz, power cable includes NEMA 20 amp plug,
L6-20P, between the supply conductors of the power cord. The power cord supplied
utilizes a twist lock connector, NEMA L6-20P. This machine must be connected to a
20 amp branch circuit. Please refer all power source issues to a certified electrician.
Refer to “Installation Instructions for Road Force / GSP9720 Series Balancers,” Form
5487-T.
CAUTION: A protective ground connection, through the grounding
conductor in the power cord, is essential for safe operation.
Use only a power cord that is in good condition.
NOTE: For information on converting from single phase NEMA
L6-20P plug to thee phase NEMA L15-20P plug refer to
Form 5350T, “NEMA L6-20P to NEMA L15-20P Power Plug
Conversion Instructions.”
Specific Precautions/BDC Laser Indicator
The BDC (Bottom Dead Center) Laser Indicator is a class 1M laser designed to aid in
applying adhesive weights. The laser is not a field serviceable or adjustable part.
Use caution in regard to reflective materials around the laser and never look into the
laser beam
GSP9720JLR Wheel Balancer Operation Instructions Getting Started
5
To Next Page
Loading...
