Hunter GSP9700 Series - Rimscan Wheel Profile Scanner; Setting Dimensions with Rimscan

SPLIT SPOKE® balancing procedure is complete.
3.21 RimScan™ Wheel Profile Scanner
RimScan™ wheel profile scanner analyzes and reproduces a cut-away view of the
rim profile. This is highly advantageous for difficult applications and for accurately
placing each individual wheel weight. RimScan™ combined with SmartWeight
®
makes single corrective weight placement simpler and more frequent, further
reducing or eliminating the static residual.
RimScan™ is available only if SmartWeight
®
is enabled. RimScan™ is designed for
adhesive weights or mixed weight balancing methods.
Setting Dimensions with RimScan™
Select “Balance” from the main screen and install the wheel on the spindle.
NOTE: For mixed weights, first move the inner Dataset
®
arm in the
UPWARD position to the clip-on weight location and tap foot
pedal to measure the distance and diameter dimensions
prior to performing RimScan™.
72
x
Balancing Procedures GSP9720JLR Wheel Balancer Operation Instructions