Hunter GSP9700 Series - The Logo Screen; Recall Specifications Screen

3.7 The Logo Screen
The GSP9720JLR logo screen offers two options for balancing. The “Standard
Balance” softkey will start a balance procedure without specific JLR procedures. Use
this when balancing a wheel/tire assembly that is not a JLR OEM assembly.
The “JLR Balance” softkey will start a balance procedure that includes JLR specific
procedures. Use this when balancing a JLR OEM wheel/tire assembly
3.8 Recall Specifications Screen
The “Recall Specifications” screen only appears if the “JLR Balance” softkey was
selected at the logo screen.
Using the softkeys or the control knob select the JLR vehicle being serviced.
36
x
Balancing Procedures GSP9720JLR Wheel Balancer Operation Instructions