To view additional details of savings due to SmartWeight, select “Show Details”
softkey from the “Smart Weight” screen.
The page shows the amount of weight savings, highlighted in blue, using
SmartWeight
®
balancing technology. The savings are shown in both
actual weight and percentage.
Select “Print Screen” to print the weight savings displayed.
Select “Exit” softkey when done.
NOTE: The statistics can be cleared by selecting the “Clear Data”
softkey. This could be used if tracking weight during a
specific period. The “Clear Data” key may only be selected
when in Service Mode. For more information refer to
“Service Mode Setup and Features,” page 113.
22
Introduction to Balancing GSP9720JLR Wheel Balancer Operation Instructions
To Next Page
Loading...
