When the scan is complete, release the foot pedal and a rim illustration will appear
with weight planes automatically placed at correct positions for tapers or steps.
RimScan™ is complete. Select “Balance to continue to the balance screen. After a
scan is performed the profile will appear on the balance screen.
The user has the ability to change corrective weight location(s). Select “Move Weight”
and change weight position with the control knob. Push the control knob to switch
between left and right weight planes.
Select “Find Best Location” to let the balancer decide what is the optimum corrective
weight location. If by chance the user-selected weight positions are unacceptable,
“Find Best Location” will return the weights to the optimum positions.
74
Balancing Procedures GSP9720JLR Wheel Balancer Operation Instructions
To Next Page
Loading...
