32 BALANCING PROCEDURES
Select “Recall Next Option Set” to cycle to the next set.
Figure 109.
Select “Print” to send before and after balance summary
results to the printer.
Figure 110.
Figure 111.
From this screen, several options may be used to create
custom printouts. Information such as the shop name,
customer name, vehicle, etc., can be displayed on the
printout.
Figure 105.
Information for the printout can be entered using the on-
screen keyboard.
Figure 106.
Also, custom data such as before service, after service,
individual tire pull, etc., can be toggled on or off for the
printout.
Figure 107.
Once the options are set for the printout, they can be
stored and recalled later.
Figure 108.
To Next Page
Loading...
