HunterDouglas Duette - Page 17

INSTALLATION
15
■
Install the stationary rail bracket.
➤
Hook the stationary rail bracket to the headrail as illustrated below.
➤
After hooking it to the headrail, you may allow the stationary rail to hang freely.
■
Position the stationary rail bracket.
➤
To move the stationary rail bracket, pull the bottom of the rail into the room slightly
before sliding the bracket.
➤
Outside Mount: Move the stationary rail bracket so that the stationary rail is aligned
with the end of the gear box.
➤
Inside Mount: Move the stationary rail bracket so that the stationary rail is flush
against the jamb.
Stationary
Rail
Stationary
Rail Bracket
Align
Outside Mount
Inside Mount
Flush
Against
Jamb