TROUBLESHOOTING
31
Problem
The shading raises or lowers unevenly, the fabric rubs against one end of
the headrail, or the bottom rail is uneven when fully raised.
Solution
Check that the window is square by measuring the diagonals.
Check that the installation brackets are level. Shim to level, if necessary.
Adjust the bottom rail weight. See below.
Adjusting the Bottom Rail Weight
■
Unscrew weight clip using
1/16” Allen wrench
■
You may need to release the weight clips by inserting a flat blade
screwdriver between the weight and the weight clip to release the
weight clip.
■
Move the weight in 1" increments toward the side where the fabric is
gathering.
■
Secure the weight clips in position by turning them counterclockwise after
making the adjustment.
■
Test and, if necessary, adjust again. (continued on next page)
Bottom Rail
Weight
Clip
Weight
Clip
Weight
Gathered
Fabric
To Next Page
Loading...
